跳至主要内容

Choose a manufacturer specializing in the production of combined screws

 There are many kinds of electroplating of iron combination screws: ordinary and environmentally friendly. For example: color zinc, generally called red color. White zinc, black zinc, white nickel. Blue zinc. There are environmentally friendly color zinc, environmentally friendly white zinc, and environmentally friendly blue zinc. Environmentally friendly white nickel. There are more advanced ones. Nickel on copper, nickel in brine.
Tools/Materials
Screw wires, iron screw wires include 1010, 1018, 10B21, etc.
Stainless steel screw wires include SUS201, SUS304, etc.
Steps/Methods
The requirements for the material of the combined screw depend on which material is required, whether it is iron or stainless steel. What is the national standard number of the combination screw? There are GB9074.8 and GB9074.4. There are GB9074.13 and so on.
The mechanical performance and strength requirements of the combined screw need not be hardened. The level requirements are divided into 4.8 and 8.8 levels.
You need to choose a manufacturer specializing in the production of combined screws. Comparison and selection of screw manufacturers' strength, sales experience and other aspects. Comparison of purchasing factors such as price, quality, service, etc. of combined screws.
Precautions
Combination screws include sub-pan head combination screws, outer hexagon combination screws, and iron combination screws, which require electroplating. And stainless steel combination screws. No electroplating is required, and the surface is bright. According to your personal needs, you can choose combination screws of different specifications.

评论

发表评论

此博客中的热门博文

Is the material of stainless steel screws magnetic?

There are many types of materials for making stainless steel screws, and they can be divided into several categories according to the structure at room temperature: austenitic type: such as 304, 321, 316, 310, etc.; martensite or ferrite type: such as 430, 420, 410 Wait;   Austenite is non-magnetic or weakly magnetic, while martensite or ferrite is magnetic. Due to component segregation or improper heat treatment during smelting, a small amount of martensite or ferrite in austenitic 304 stainless steel will result. In this way, 304 stainless steel will have weak magnetic properties.     After 304 stainless steel is cold worked, the structure will also be transformed into martensite. The greater the degree of cold working deformation, the more martensite transformation and the greater the magnetic properties of the steel. Like a batch of steel belts, Φ76 tubes are produced without obvious magnetic induction, and Φ9.5 tubes are produced. Because the bending deformation...
发表评论
阅读全文

How to prevent stainless steel screws from rusting

 Analysis of the causes of rusty hardware screws: 1. When the electroplating factory is electroplating hardware screws, the drying is not done, resulting in residual water vapor. Or, after drying, condensate is formed during packaging. Dongguan Electronic Screw Factory introduces to you, it causes chemical reaction, produces bad occurrence, and causes hardware screw to rust. 2. Stored in a humid place for a long time. Over time, the hardware screws will slowly be corroded and oxidized, causing serious rust. 3. When electroplating hardware screws, the electroplating is poor, and the electroplating layer is too thin. Cause rust. All in all, analyze the reasons from four aspects.   The four directions are: 1. Storage environment 2. Types of electroplating 3. How to save 4. Use environment. Therefore, we must pay attention to the key points in the use of stainless steel screws: 1. The surface of the stainless steel screw adheres to the organic juice (such as melon, vegetable, nood...
发表评论
阅读全文

How to distinguish between high-strength nuts and ordinary nuts?

What is the difference between high-strength nuts and general nuts, in fact, you only need to understand their standards and other characteristics to easily distinguish them. The so-called high-strength nut is a special bolt with high strength and high fatigue resistance used in special equipment or engineering. Of course, generally high-strength nuts are used with high-strength bolts to achieve better application. We generally see that many bolts with M heads in the market are ordinary nuts, not high-strength nuts. The calibration side of the general hexagonal head nut is the following pattern M30, and M30 indicates the thread standard, that is, the inner diameter of the thread is 30mm. Grade 10 indicates the functional grade of the bolt, and tZn is the surface treatment method. Other types of bolts also have their own expressions, but generally threaded bolts have to use the original functional grade of "M": The functional level of the nut is divided into 3, 4, 4, 5, 5.8, 6...
1 条评论
阅读全文